1
Upload or paste
Drop a PDF, snap a photo of a paper quote, or paste the line items. We read them all.
PDF, JPG, PNG, WebP
Free quote analysis · No sign-up
Is your underfloor heating quote actually fair?
Upload your quote — PDF or photo — and we'll compare it to UK market rates, flag anything missing, and highlight risks. Results in about 15 seconds.
Benchmarked against real UK quotesMissing-item & risk detectionPrivate — never shared
~15s
Time to result
£0
Cost & no sign-up
12k+
Quotes analysed
How it works
Three steps. About fifteen seconds.
No sign-up. No salespeople. Just an honest read on whether the numbers add up.
2
We benchmark every line
Each item is compared to typical UK pricing for your floor type, system and region — flagging anything high, low, or missing.
Quietly assisted by AI
3
Get a plain-English report
A verdict, a price band, missing items, risks, and questions to put to your installer.
Results in ~15 seconds
What we check
Twelve things a good UFH quote should include.
We work through the same checklist a Gas Safe-registered installer would. If something's missing or unusual, we'll say so.
Heat-loss calculation
Was the system sized for your home, or guessed from floor area alone?
Pipe spacing & loop length
Tight enough to actually heat the room — and matched to your floor covering.
Manifold specification
Correct port count, flow meters, actuators — and not over-specced for the job.
Insulation under pipes
Often the first thing skimped on — and the reason a system runs cold and expensive.
Screed type & depth
Liquid anhydrite vs. sand & cement — priced fairly for your floor build-up?
Controls & zoning
Thermostats, wiring centre, smart controls — and whether multi-zone is necessary or oversold.
Heat-source interface
How the UFH ties into your boiler, heat pump or hot-water cylinder — properly buffered?
Labour days & crew size
Realistic for the m² and floor build-up — not padded, not stripped.
Pressure test & commissioning
Itemised separately, with a written record handed over at sign-off.
Warranty & aftercare
Pipework, manifold and labour warranties — and what's actually covered.
VAT & payment schedule
VAT shown correctly, deposit reasonable, no large upfront cash demand.
Certifications referenced
Gas Safe, NICEIC, MCS — and confirmation that the named installer is registered.
Sample report
This is what you'll get back.
An anonymised example. Yours will look much the same, with your numbers and your line items.
Quote-March-2026.pdf
Wet UFH · 65 m² ground floor · GL postcode
Roughly fair — with caveats
Your quote of £12,840 is about 8% above the UK median for a job this size.
The pipework, manifold and screed prices land in the normal range. Labour days look high, and two key items aren't itemised — see below.
Total vs UK benchmark£12,840
£9,200
Low£11,900
Median£14,800
High
Low£11,900
Median£14,800
High
Line items7 checked
Pipework & manifold (8-port)
£2,930 — within £150 of the typical UK price for this size.
Liquid screed, 50 mm
£1,890 — fair for a 65 m² ground floor. Includes pump-truck.
Labour — 4 days, 2 fitters
£2,400. UK median for this scope is 2.5–3 days. Worth asking why.
Insulation under pipework
Not itemised. Standard for this build-up is 75–100 mm PIR — confirm before signing.
Pressure test & commissioning
Mentioned but not priced or scheduled. Should be a separate line with a written hand-over.
UK benchmark comparison
| Item | Your quote | UK median | Typical range |
|---|---|---|---|
| System & pipework (per m²) | £96 / m² | £92 / m² | £78–£110 |
| Manifold (8-port, fitted) | £820 | £780 | £640–£940 |
| Liquid screed (50mm) | £29 / m² | £28 / m² | £24–£34 |
| Labour (per fitter-day) | £300 | £290 | £240–£340 |
| Controls — single zone | £420 | £390 | £300–£520 |
Three questions to put to your installer
We'll list them in your report: why 4 labour days, what insulation is going under the pipes, and whether commissioning will be itemised on the final invoice.
Reports are guidance, not a substitute for a survey. We benchmark against real UK quote data, but every home is different — use our findings as questions to ask your installer.
Frequently asked
Quick answers before you upload.
Is this really free?
Yes — completely free, with no sign-up, no card, and no email required to see your result. We make our money from installers and brands paying to list on the directory, not from homeowners.
What happens to my quote after I upload it?
Your file is processed in private, the analysis is returned to your browser, and the original file is deleted from our servers within 24 hours. We never share files, installer names or your contact details with anyone. We do keep an anonymised summary (system type, region, totals) to improve our benchmark — never anything that could identify you or the installer.
How accurate is the benchmark?
The benchmark is built from real UK quotes, segmented by system type, floor build-up and region. It's a strong indicator of fair value, but it isn't a survey. Treat the findings as questions to put to your installer, not a verdict on their work.
What file types work? Can I upload a photo of a paper quote?
PDF, JPG, PNG and WebP, up to 10 MB. Phone photos of paper quotes are fine — just make sure the line items are legible. If you'd rather not upload anything, paste the line items as text and we'll work from that.
Will you tell my installer I checked their quote?
No. Your analysis is private to you. We don't contact installers, and we don't pass your details on unless you ask us to introduce you to a different one.
What if my quote looks bad — can you recommend someone else?
Yes, if you want. Once you've seen the analysis we'll show verified local installers in your region — with genuine Google reviews — so you can request a second quote and compare. It's free and there's no obligation.
Want a second quote from a verified installer?
Browse local UFH professionals, read genuine Google reviews, and request a free comparison quote — no obligation.
Find Installers Near Me