Underfloor Heating in Bicester
Looking for underfloor heating in Bicester? Whether you need a wet system installed in a new build, electric UFH fitted in your bathroom, supply-only for a DIY project, or a repair on an existing system — find 25 verified local professionals below with genuine customer reviews.
25 Underfloor Heating Businesses in Bicester
Sorted by rating — highest-rated first
HeatView Emergency Plumber/Boiler Repair Bicester
Huckin & Co
Construction and heating services operating in and around Oxfordshire. Specialist underfloor heating installers with a sister company dedicated to all aspects of renewable heating. Which? Trusted Trader approved. Offering competitive prices to both domestic and commercial customers.
Ultimate Renewables Supplies
One of the UK leading design and supply specialists in Heat Pumps, MVHR, PV & Battery Storage, and Underfloor Heating with over 50 years of experience. Based in Bicester, Oxfordshire, providing renewable energy solutions including air and ground source heat pumps, solar PV, underfloor heating design and supply.
A1 Services (Oxford) Ltd
Established in 1967, A1 Services Oxford is a well-established firm of gas fitters and heating engineers specialising in underfloor heating, plumbing and heating installations across Oxfordshire including Bicester. Known for professional and friendly service delivering on time and on budget.
Types of underfloor heating service in Bicester
UFH covers a wide range of needs. Use the descriptions below to identify what you're looking for, then contact the relevant businesses above.
Wet Underfloor Heating
Water-based systems using warm water pumped through pipes beneath your floor. More efficient long-term and ideal for new builds or full renovations.
Electric Underfloor Heating
Heating cables or mats installed under tiles, laminate or engineered wood. Low installation cost, perfect for single rooms like bathrooms and kitchens.
UFH Supply & Products
Thermostats, manifolds, insulation boards, pipes and mats available from local specialists. Some suppliers also offer design and specification advice.
Repairs & Servicing
Fault diagnosis, thermostat replacement, pressure testing and full system servicing. Keep your underfloor heating running at peak efficiency.
New Build Installations
Full system design, installation and commissioning for new build properties. Includes heat loss calculations and system sizing for every room.
Retrofit & Renovation
Adding UFH to an existing property without full floor replacement. Overlay systems and low-profile solutions available for minimal disruption.
Underfloor heating cost guide — Bicester
Prices vary by system type, floor area and existing construction. These are typical ranges for the Bicester area — always get multiple quotes.
| System type | Typical cost |
|---|---|
| Electric UFH (single room) | £400–£900 |
| Wet UFH (per room) | £1,000–£2,500 |
| Whole house (wet system) | £3,500–£12,000+ |
| Retrofit overlay system | £600–£1,500 per room |
Prices are indicative for 2025 and include supply and installation unless stated. Get quotes from our listed Bicester professionals for accurate pricing.
How to choose an underfloor heating installer in Bicester
Check relevant certifications
Wet systems connected to a gas boiler require a Gas Safe registered engineer. Electric UFH work should be carried out by a Part P or NICEIC certified electrician. Don't skip this step.
Ask about UFH experience specifically
Many plumbers and electricians list UFH as a service, but specific experience matters. Ask how many UFH installations they've completed and whether they can provide references.
Get a heat loss calculation
A reputable installer will calculate the heat loss for each room before sizing the system. This ensures the UFH can keep the room at temperature even on the coldest days.
Compare at least 3 quotes
Prices vary significantly. A low quote may mean cheaper materials or corners being cut on insulation. Ask each installer to quote like-for-like so you can compare fairly.
Check reviews carefully
Read Google reviews and look for mentions of UFH specifically — not just general plumbing or electrical work. Recency matters too: look for reviews from the past 12 months.
Ask about the warranty
Quality UFH systems carry 10–25 year manufacturer warranties on the pipe or cable. Make sure your installer registers the warranty on your behalf and provides the documentation.
Underfloor heating FAQs — Bicester
Common questions from homeowners in Bicester.
How much does underfloor heating cost in Bicester?
In Bicester, electric underfloor heating typically costs £400–£900 per room including installation, making it popular for bathrooms and kitchens. Wet (water-based) systems cost £1,000–£2,500 per room, or £3,500–£12,000 for a whole house. Get quotes from several of the 25 local professionals listed on this page to compare prices for your specific project.
What's the difference between wet and electric underfloor heating?
Wet (hydronic) underfloor heating uses warm water pumped through pipes beneath the floor and is connected to your boiler or heat pump. It runs at lower temperatures (35–45°C), is more efficient long-term, and suits new builds or major renovations. Electric UFH uses heating cables or mats and costs less to install, making it ideal for single rooms or retrofit projects. Most installers in Bicester offer both types and can recommend the best solution for your home.
Can underfloor heating be retrofitted in an existing Bicester property?
Yes — many Bicester homes are good candidates for retrofit UFH. Electric mats can be installed under tiles or engineered wood with as little as 3–5mm height increase. For wet systems, low-profile overlay boards (around 15–25mm) avoid the need to dig up existing floors. A local specialist can assess your floors and insulation and recommend the most cost-effective approach.
Is underfloor heating energy efficient?
Underfloor heating operates at lower water temperatures than radiators (35–45°C vs 65–75°C), which makes it significantly more efficient — especially when paired with a heat pump. Electric systems are 100% efficient at the point of use, though running costs depend on electricity tariffs. Many homeowners who switch to UFH report lower heating bills, particularly in well-insulated properties.
What flooring works best with underfloor heating?
Ceramic and porcelain tiles are the most effective as they have excellent thermal conductivity. Stone, slate and polished concrete also work very well. Engineered wood and laminate are compatible if they have low thermal resistance (below 0.15 tog). Solid hardwood and thick carpets retain heat and reduce efficiency — though UFH-compatible carpet options are available. Your installer can advise on whether your planned flooring is suitable.
How long does underfloor heating take to install?
A single-room electric UFH system can typically be installed in one day. A wet system for one room takes 1–2 days, while a whole-house wet installation for an average property usually takes 3–7 days including screed laying and connection to the boiler. Most Bicester installers can give you a detailed timeline after an initial site survey.
Do I need planning permission for underfloor heating in Bicester?
In most cases, no. UFH installation is considered permitted development in England. However, if your property is listed or in a designated conservation area, you should check with the local planning authority first. Any gas connections must be carried out by a Gas Safe registered engineer, and electrical work by a Part P certified electrician.
How do I choose a reliable underfloor heating installer in Bicester?
Look for Gas Safe registration (for wet systems on gas boilers), NICEIC or Part P certification (for electric systems), and membership of trade bodies such as CIPHE or APHC. Ask specifically about their experience with underfloor heating — not just general plumbing or electrical work. Check Google reviews carefully and ask for references from previous UFH jobs. All businesses in our Bicester directory have verified customer reviews.
Can underfloor heating replace radiators entirely?
Yes, in a well-insulated property, a correctly-sized UFH system can be the sole heat source. Modern systems with room-by-room thermostatic controls give excellent comfort and efficiency. In older or poorly insulated properties, UFH is sometimes combined with a few radiators in rooms with high heat loss. A qualified installer will carry out heat loss calculations to determine the right approach for your home.
Is underfloor heating suitable for bathrooms?
Bathrooms are one of the most popular and cost-effective applications for UFH, particularly electric systems. A heated tile floor eliminates cold-morning discomfort and helps keep the room dry, reducing mould. Electric mats are typically installed under tiles in a day, with minimal disruption. Many Bicester plumbers and tilers offer this as part of a bathroom renovation package.